Tag: molding window

Creating a Virtual Plastics Injection Molding Window

By Bozilla
April 27, 2022

Since the inception of plastic injection molding, creating a robust injection molding process has always been a challenge As time has progressed, the design of plastic parts has become more detailed and intricate, the tolerances have become tighter and the boundaries of injection molding standards are being pushed to their limits The combination of each one of these factors is making it more and more difficult to create and maintain a robust molding process

Initially, it wasn’t difficult to design a basic injection molding window that would result in a robust molding process However, with the advent of increasingly demanding factors it has become more difficult to design a process molding window that is large enough to be robust and create consistently good parts As a matter of fact, not only is it difficult to create a wide process molding window, it’s nearly impossible to create a suitable molding window- Period We will discuss how and why it is necessary to first create a virtual injection molding window and how that data can be translated to the floor in order to have the best injection molding window possible

Let’s begin with understanding what a molding window (or process window) is Typically, a molding window is comprised of three major factors: Fill time (or fill speed), Mold Temperature and Melt Temperature Each of these factors has the greatest impact on the injection molding process

Graphs below will illustrate the impact of each

The influence of each factor:

  • Fill Time (fill speed): As fill speed decreases, the material moves into and through the cavity slowly which allows the cooling effects of the tool steel to have more time to influence and cool the temperature of the plastic resulting in a higher viscosity response and a greater pressure to fill the cavity Conversely, as the fill speed increases, the material will shear thin (the viscosity will decrease) significantly, but ultimately the plastic will resist filling the cavity and require a greater pressure to fill the cavity Somewhere between filling extremely slow and filling extremely fast is a sweet spot that requires low pressure to fill the cavity If plotted out in a graph, it will be a u-shaped curve where the lowest point is typically a good fill speed

molding window pressure

  • Mold Temperature: The mold temperature is highly influential with regards to having the material fill the cavity The thickness of the part relative to the flow length is an important relationship with regards to the impact of the mold
Read More